The unit is an advanced high-frequency field dental x-ray device rated at 60kV DC and 2 mA tube current. It has inverter X-ray control methods for producing tooth and maxillary bone images for both chemical film and digital sensors in high quality. The unit operates on a 22.2VDC supplied by a rechargeable LiPolymer battery pack. When radiographs are to be taken, the device can either be handheld or mounted on a tripod.
Functional Explanation:
Status Display on the LED:
LED color changing: Unit status display
Off ⇒ Turn off
Green ⇒ Standby for shot
Yellow ⇒ Exposing X-ray
Red ⇒ Unit error
X-ray EXPOSURE button:
It makes use of X-ray EXPOSURE.
If you press the button 2 seconds more, it will expose for the set time.
If you release the button before 2 seconds, it occurs a unit error.
X-ray Exposure cone:
We made the inside of the cone with lead, it prevents from exposing the X-ray to the user.
Hand strap ring:
The top and bottom rings are connected with a hand strap.
Necklace strap ring:
It is for connecting with the necklace strap.
Big/Small size option:
Press the key to show the size option on the screen.
Power ON /OFF button:
It is a button for turning on (or turning off) the unit.
Changing exposure time up (+):
When presses the button, the exposure time will be increased.
Changing exposure time down (-):
When presses the button, the exposure time will be decreased.
User's MODE button:
If the user wants to change the set item, press the button and you can enter the set item area.
Saving exposure time:
If you press the button 2 seconds more, the exposure time is stored.
Charging connector:
The connector is for the purpose of charging the battery.
Hand Switch connector:
The connector is for the purpose of connecting with a hand switch.
Tooth type of exposure object:
They are buttons for selecting tooth of the exposure object.
LCD screen:
It is displayed the unit's status and information.
Standard fixing Hall:
The hall is for the purpose of use with a tripod.
Battery replacement cover:
The cover is used for battery protection and replacement.
Main body:
1. X-ray generator
Tube Voltage 60 kV (Fixed)
Tube current 2 mA (Fixed)
2. X-ray Control device
Main power Battery 22.2 V DC, Adaptor 25.6 V DC.
Exposure time 0.01 - 2.00 sec (Manual 56 steps)
3. X-ray Exposure
Type Round style.
Output Radiation Field 60 mm.
SSD(standard) 200 mm
4. X-ray tube
Type Stationary anode X-ray tube.
Tube Model KL11-0.4-70
Tube Focus 0.4 mm.
Anode heat capacity 4500 J
Maximum Tube Voltage 70 kV.
Target Angle 12 °
Total filtration Basic filtration 0.8 mm Al. Additional filtration 1.0 mm Al
Solid high thermal conductivity resin cooling system
Battery:
Type Li-ion Polymer.
Voltage 22.2 V DC.
Capacity 950 mAh
Charger:
Input 100 - 240 V AC, 50 - 60 Hz.
Output voltage 25.2 V DC
Output current 1 A.
Status display of unit LED (Red: Undercharging, Green: Finished charging)
0.4mm focus to get high-definition images:
High-voltage generator with 0.4mm focus, high-definition imaging, enjoy top quality.
High-frequency DC technology:
Ultra-low radiation, the exposure dose is reduced by more than 30% compared with the standard generator, maximizing effective rays and greatly reducing the radiation intensity.
Ergonomic design:
Shoot different teeth, fine-tune the shooting time, and achieve personalized and precise control.
High-capacity lithium battery:
950 mAh ultra high capacity battery, the battery can be replaced, low cost Of use.
Multiple shooting methods:
The battery is durable, it can take about 150 images after being fully charged.
1 x Main Unit
1 x Cone
1 x User Manual
1 x Adapter
1 x Shoulder Strap
1 x Hand Strap
1 x Qualification Certificate
Manufacturer/Importer warranty of 1 Year as applicable for this product