Waldent Automatic Crown Remover Kit is a spring-loaded mechanical device to remove the bonded crowns and bridges by an intensive impulse. Spring loaded crown remover with 6 tips, a wrench and a swivel lock key. Special tip for bridge removing and impulse strength is controllable. Six different designs of tips allow engaging in different places of crown margins. It has a special steel string that can be pulled underneath the bridge and engaged in the rectangular tip when an impulse is applied to it pulls out the bridge. Impulse strength should be lowered for root treated teeth. For permanent removal of crowns by breaking the seal between tooth and crown even after sectioning with a bur. The setting of the impulse to a higher level can break the underlying tooth. Be careful.
INDICATIONS OF AUTOMATIC CROWN REMOVER KIT:
Permanently cemented crowns and or bridges
Temporary cemented provisional or final restorations
Maryland bridges
Orthodontic brackets/bands
Removable appliances/retainers fixed abutments
Instrument Name
Automatic crown Remover
Type
Dental Crown Remover
Category
Prosthodontics
Material
Stainless Steel
Disposable / Reusable
Reusable
Sterile / Non-Sterile
Non - Sterile
Latex / Latex - free
Latex Free
STERILIZATION:
We recommend that the temperature does not exceed 120C
Dry heat sterilization see that temperature does not exceed 180C and there should be no long exposure as this would cause discoloration, loss of temper and this in turn would disturb the hardening of the instrument
Do not use substandard chemicals or disinfectants as they can damage the instruments
Avoid use of unsuitable highly acidic chlorine containing agents
Use Demineralized water only
Never rub an instrument with metal brush at the time of cleaning.
